Cooling tanks are available in vertical and horizontal shapes. From 200L to 10,000L. Milk is the raw material for many products.
There are many types of bacteria in the micro flora of the milk and they can negatively affect the quality of the milk. In technological aspect, treatment of milks that have high bacterial concentration becomes difficult and the quality of the obtained products drops significantly.
Numerous factors from the health condition of the animal, from which the milk is originated, to the moment the milk is converted into final product or delivered to consumers affect the quality of the milk.
Cooling tanks that are used in cold chain are intended to prevent development not elimination of bacteria. Development of bacteria may be prevented with equipment that provide hygienic milking of the milk, measuring of the milk, transporting of the milk and cooling of the milk.
IT IS RECOMMENDED THAT BACTERIA MULTIPLICATION SHOULD BE INHIBITED/STOPPED BY REDUCING THE TEMPERATURE OF MILK TO 4°C WITHIN THE FIRST 3 HOURS OF MILKING.
Most significant advantage that is provided by cooling the milk to the user; is intended to store the milk that is not heat treated in a healthy way by keeping the rapidly developing number of microorganisms at same level during milking and transporting the milk.
Classification of milk Cooling Tanks is done in three ways as indicated below;
a) Class 2 Milking Tanks; cools the 50% of the capacity at once.
b) Class 4 Milking Tanks; cools the 25% of the capacity at once.
c) Class 6 Milking Tanks; cools the 16.7% of the capacity at once.
a) Class 0 Takes 2hrs to cool milk from initial temperature to 4°C
b) Class I Takes 2.5hrs to cool milk from initial temperature to 4°C
c) Class II Takes 3hrs to cool milk from initial temperature to 4°C
d) Class III Takes 3.5hrs to cool milk from initial temperature to 4°C
a) Class A Performance Temperature is 38°C; Safe Operation Temperature is 42°C
b) Class B Performance Temperature is 32°C; Safe Operation Temperature is 38°C
c) Class C Performance Temperature is 25°C; Safe Operation Temperature is 32°C
From the above classification, the most efficient and thus suitable solution for optimum performance and values for money is CLASS 2 B II. ALL our milk coolers meet this criteria.
PHS Vertical Model Milk Cooling Tank – Bottom Group
- 100 Lt
- 200 Lt
- 325 Lt
- AISI 304 quality stainless steel
- 1st wall base is 2 mm and it also has 0,8 mm Ep type laser welded cooler evaporator
- surface that is coupled to wall.
- 1st wall body 1,5 mm
- Isolated body 1 mm
- Cooler unit is mounted from the bottom side of the tank body.
- There are 1 25 W 21 d/d redactor and stainless steel mixer blade on redactor.
- Isolation range has 50 mm thickness, isolated with water based, non-HCFC high density polyurethane foam material.
- Product output has DN50 stainless, cleanable butterfly valve.
- There is also spring cover.
- There is Ø 200 mm covered product entry on the cover.
- There is manual measuring scale with ‰ 3-4 sensitivity rate.
- There are adjustable bolted stands under the tank.
- Design that allow zero liquid to remain in the rank during discharge.
- Welded sections are welded with 1st class Argon TIG welding and has 1st class
- Smooth polishing
- Fast Cooling without crystallization within minimum milk volume Minimum gas charging
- Cooling with R404 A gas
- Peymak Milk Cooling Tanks provide each milking to cool from 35°C to 4°C at ambient temperature (32°C– 38°C)
- Direct Expansion System
- TSE regulation 13732 of Compliance certificate
- T.C. Uluda¤ University Test of Compliance Certificate
- Optionally, designs Suitable for 2, 4 and 6 milking time
- Protection grade IP 65 Electric control panel
- Tanks operate at 220 volt energy.
- Digital thermometer heat level indicator
- Electronic control card that is specially designed and is able to control the milk
- temperature and operation of the tank, easy utilization Phase protection relay
- System disables automatically when the cover of the tank is opened.
- Automatic mixing program with special software; Mixer operation time may be adjusted with desired intervals after the milk is brought to desired ser value. (3 minutes of operation, 10 minutes of break)
- Manual washing
PHS Vertical Model Milk Cooling Tank - Standard
- 325 Lt
- 500 Lt
- 1000 Lt
- 1500 Lt
- 2000 Lt
- AISI 304 quality stainless steel
- 1st wall base is 2 mm and it also has 0,8 mm Ep type laser welded cooler evaporator surface that is coupled to wall.
- 1st wall body 1,5 mm
- Isolated body 1 mm
- Cooler unit and tank body are mounted on single chassis.
- There are 1 25 W 21 d/d redactor and stainless steel mixer blade on redactor.
- Isolation range has 50 mm thickness, isolated with water based, non-HCFC high density polyurethane foam material.
- Product output has DN50 male sleeve, butterfly valve.
- There is also spring cover.
- There is Ø 200 mm covered product entry on the cover.
- There is manual measuring scale with ‰ 3-4 sensitivity rate.
- There are adjustable bolted stands under the tank.
- Design that allow zero liquid to remain in the rank during discharge.
- Welded sections are welded with 1st class Argon TIG welding and has 1st class smooth polishing.
- Fast Cooling without crystallization within minimum milk volume Minimum gas charging
- Cooling with R404 A gas
- Peymak Milk Cooling Tanks provide each milking to cool from 35°C to 4°C at ambient temperature (32°C– 38°C)
- Direct Expansion System
- TSE regulation 13732 of Compliance certificate
- T.C. Uluda¤ University Test of Compliance Certificate
- Optionally, designs Suitable for 2, 4 and 6 milking time
- Protection grade IP 65 Electric control panel
- Tanks operate at 220 volt energy.
- Digital thermometer heat level indicator
- Electronic control card that is specially designed and is able to control the milk
- temperature and operation of the tank, easy utilization Phase protection relay
- System disables automatically when the cover of the tank is opened.
- Automatic mixing program with special software; Mixer operation time may be adjusted with desired intervals after the milk is brought to desired ser value. (3 minutes of operation, 10 minutes of break)
- Manual washing
PHS Horizontal Model Milk Cooling Tank
- 2000 Lt
- 2500 Lt
- 3000 Lt
- 4000 Lt
- 5000 Lt
- 6000 Lt
- 8000 Lt
- 10000 Lt
- 12000 Lt
- AISI 304 quality stainless steel
- 1st wall base is 2 mm and it also has 0,8 mm Ep type laser welded cooler evaporator surface that is coupled to wall.
- Isolated wall is 1,5 mm for 2000 – 4000 Lt capacity tanks and 2 mm for 5000 – 120000 Lt capacity tanks.
- Cooler unit and tank body are mounted on single chassis.
- There are 1 0,34 HP 33 d/d redactor and stainless steel mixer blade on redactor. There are 2 mixer at 6000 Lt, 8000 Lt, 10000 Lt and 12000 Lt milk cooling tanks.
- Isolation range has 60 mm thickness, isolated with water based, non-HCFC high density polyurethane foam material.
- Product output has DN50 male sleeve, butterfly valve.
- There is also AISI 304 quality stainless steel Ø 500 mm manhole cover.
- There is Ø 100 mm covered product entry on the manhole cover.
- There is Ø 90 ventilation outlet.
- There is manual measuring scale with ‰ 3-4 sensitivity rate.
- It has anti-slippery AISI 304 quality ladder.
- Design that allow zero liquid to remain in the rank during discharge.
- Welded sections are welded with 1st class Argon TIG welding and has 1st class smooth polishing.
- There are adjustable bolted stands under the tank
- Fast Cooling without crystallization within minimum milk volume
- Minimum gas charging
- Cooling with R404 A gas
- Peymak Milk Cooling Tanks provide each milking to cool from 35°C to 4°C at ambient temperature (32°C – 38°C)
- There are solenoid valve, dilatation valve, dryer, vision glass, liquid holder and valves of compressor.
- Direct Expansion System
- TSE regulation 13732 of Compliance certificate
- T.C. Uluda¤ University Test of Compliance Certificate
- Optionally, designs Suitable for 2, 4 and 6 milking time
- Protection grade IP 65 Electric control panel
- Tanks operate at 380 volt energy.
- Digital thermometer heat level indicator
- Electronic control card that is specially designed and is able to control the milk temperature and operation of the tank, menus, easy utilization
- In case of electronic system malfunction, cooling process is continued with manual position.
- There is electro-mechanic additional safety system that is adjusted to 1,52°C in order to prevent milk from freezing.
- In case of any malfunction, there is a message relating to such malfunction.
- Compressors are activated gradually in order to prevent immediate current withdrawal at multiple system compressors.
- There is a possibility to monitor the malfunctions, washing temperature, milk temperature, electronic faults in last 20 days.
- Phase protection relay
- Automatic mixing program with special software; Mixer operation time may be adjusted with desired intervals after the milk is brought to desired ser value. (3 minutes of operation, 10 minutes of break
- Water is provided to all surfaces through special design CIP ball.
- Automatic washing with single button
- Low level detergent consumption
- Easily usable detergent container
- Safety system that prevents water to be mixed with milk
- ‰ 0-2 measuring accuracy.
- Milk level in the tank can be monitored from the command panel.
- Milk level in the tank can be displayed as mm, kg and Lt type.
- Automatic Detergent Dosing Pump
- Malfunction notification to cell phones with messages
- Heat Recovery Tank
PYY Half Round Model Milk Cooling Tank
- 1000 Lt
- 1500 Lt
- 2000 Lt
- 3000 Lt
- AISI 304 quality stainless steel
- 1st wall base is 2 mm and it also has 0,8 mm Ep type laser welded cooler evaporator surface that is coupled to wall.
- 1st wall body 1,5 mm
- Isolated body 1,5 mm
- Cooler unit and tank body are mounted on single chassis.
- There are 1 25 W 21 d/d redactor and stainless steel mixer blade on redactor.
- Isolation range has 55 mm thickness, isolated with water based, non-HCFC high density polyurethane foam material.
- Product output has DN50 male sleeve, butterfly valve.
- There is also spring cover.
- There is Ø 200 mm covered product entry on the cover.
- There is manual measuring scale with ‰3-4 sensitivity rate.
- There are adjustable bolted stands under the tank.
- Design that allow zero liquid to remain in the rank during discharge.
- Welded sections are welded with 1st class Argon
- TIG welding and has 1st class smooth polishing.
- Fast Cooling without crystallization within
- minimum milk volume
- Minimum gas charging
- Cooling with R404 A gas
- Peymak Milk Cooling Tanks provide each milking to cool from 35°C to 4°C at ambient temperature (32°C-38°C)
- There are solenoid valve, dilatation valve, dryer, vision glass, liquid holder and valves of compressor.
- Direct Expansion System
- TSE regulation 13732 of Compliance certificate
- T.C. Uluda¤ University Test of Compliance Certificate
- Optionally, designs Suitable for 2, 4 and 6 milking time
- Protection grade IP 65 Electric control panel
- Tanks operate at 380 volt energy.
- Digital thermometer heat level indicator
- Electronic control card that is specially designed and is able to control the milk temperature and operation of the tank, easy utilization
- Phase protection relay
- System disables automatically when the cover of the tank is opened.
- Automatic mixing program with special software; Mixer operation time may be adjusted with desired intervals after the milk is brought to desired ser value.(3 minutes of operation, 10 minutes of break)
- Manual washing
- Emergency cooling switch, digital level indicator, heat recovery tank
PNT Milk Transfer Tank
- 500 Lt
- 1000 Lt
- 1500 Lt
- 2000 Lt
- 3000 Lt
- 4000 Lt
- 5000 Lt
- AISI 304 quality stainless steel
- Isolation range has 50 mm thickness, (optional).
- 400 mm manhole cover on top, product inlet, ventilation, male sleeve, butterfly valve.
- Design that allow zero liquid to remain in the rank during discharge.
- Semi-Lunar Stands that are suitable with tank body Welded sections are welded with 1st class Argon
- TIG welding and has 1st class smooth polishing.
- Single Wall & Isolated
- Elliptic % Circular Models
- Mounted on the platform